2026 Harley-Davidson® Street Bob® near Lancaster, CA

2026 Harley-Davidson Street Bob motorcycle parked along a city sidewalk near Lancaster, CA, showcasing classic cruiser styling.

The 2026 Harley-Davidson® Street Bob® is engineered as a high-displacement cruiser that combines mechanical simplicity with advanced electronic rider assistance. This model integrates the Milwaukee-Eight® 117 Classic engine, a six-speed Cruise Drive® transmission, a Softail®-based chassis, and a comprehensive suite of safety technologies. Its specifications reflect a balance of torque-focused performance, stable geometry, and modern electrical integration. The following detailed overview presents the motorcycle strictly through its measurable components, systems, and functional attributes.

Milwaukee-Eight® 117 Classic Engine Configuration

The 2026 Harley-Davidson® Street Bob® is powered by the Milwaukee-Eight® 117 Classic V-twin engine with a displacement of 117 cubic inches, equivalent to 1,923 cc. The engine uses a bore of 4.075 inches and a stroke of 4.5 inches. The compression ratio is set at 10.3 to 1, supporting efficient combustion and consistent power delivery across the operating range.

This engine produces 120 ft-lb of torque at 2,500 rpm under J1349 testing standards. Maximum output reaches 98 horsepower, or 73 kW, at 4,600 rpm. The torque curve prioritizes low- and mid-range response, allowing the motorcycle to accelerate smoothly from lower engine speeds without excessive throttle input.

The valvetrain consists of pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder. This configuration reduces routine valve maintenance requirements and ensures consistent valve timing. Fuel is delivered through Electronic Sequential Port Fuel Injection, providing precise metering and consistent throttle response.

Air intake is managed by a 9-inch round air cleaner with a center bolt cover and washable fiberglass filter media. Exhaust gases exit through a 2-into-1 system with a catalyst integrated into the header assembly. The lubrication system operates on a pressurized dry-sump design with an oil cooler, which assists in maintaining stable operating temperatures under sustained riding conditions.

Transmission and Drivetrain Engineering

Power from the Milwaukee-Eight® 117 engine is transferred through a mechanical 10-plate wet clutch with assist and conventional functionality. This clutch design reduces lever effort while maintaining strong engagement under acceleration.

The transmission is a 6-Speed Cruise Drive® unit designed to balance acceleration and highway cruising efficiency. The overall gear ratios are 9.311 in first gear, 6.454 in second, 4.793 in third, 3.882 in fourth, 3.307 in fifth, and 2.79 in sixth. These ratios allow controlled low-speed maneuvering and reduced engine rpm at sustained highway speeds.

Primary drive uses a chain with a 34 to 46 ratio. Final drive is belt-operated with a 32 to 66 ratio. The belt final drive system reduces maintenance requirements compared to traditional chain-driven rear systems and contributes to smooth power transfer.

Chassis Structure and Frame Composition

The frame is constructed from mild steel tubular sections featuring a rectangular section backbone. The assembly incorporates stamped, cast, and forged junctions that are MIG welded for structural integrity. Aluminum forged fender supports reduce unsprung mass while maintaining durability.

The swingarm is built from mild steel tubular sections with a stamped cross-member and forged axle junctions. It includes a removable belt spacer to maintain alignment of the final drive system. This configuration supports stability under acceleration and braking loads.

Steering geometry includes a 30-degree rake and a 6.2-inch trail. The wheelbase measures 64.2 inches. These dimensions contribute to straight-line stability and controlled steering response during cornering.

Overall length measures 91.3 inches, with an overall width of 36.4 inches and an overall height of 45.7 inches. Static ground clearance is 4.9 inches. Lean angles measure 28.5 degrees on both the left and right sides under J1168 testing standards.

Suspension Systems and Travel Metrics

Front suspension consists of a 49 mm dual-bending valve telescopic fork equipped with aluminum triple clamps and dual-rate springs. Gaiter covers protect the fork tubes. Front suspension travel measures 5 inches, allowing controlled absorption of road irregularities while maintaining steering precision.

Rear suspension uses a hidden, free-piston, coil-over monoshock with a 43 mm stroke. The shock incorporates cam-style preload adjustment to accommodate varying rider loads. Rear suspension travel measures 3.4 inches.

This combination of front and rear suspension components supports balanced ride characteristics while maintaining chassis rigidity during acceleration and braking.

Wheel and Tire Specifications

The 2026 Harley-Davidson® Street Bob® is equipped with black Annihilator cast aluminum wheels. The front wheel measures 19 inches in diameter and 2.5 inches in width. The rear wheel measures 16 inches in diameter and 3 inches in width.

Tires are Dunlop® Harley-Davidson® Series bias blackwall models. The front tire specification is 100/90B19 57H. The rear tire specification is 150/80B16 77H. These tire dimensions support traction, predictable handling, and load capacity consistent with the motorcycle’s performance output.

Gross vehicle weight rating is 1,160 pounds. Gross axle weight ratings are 450 pounds for the front and 730 pounds for the rear. Weight as shipped is 622 pounds, while weight in running order is 646 pounds.

Braking System and Stability Control

The braking system incorporates a 4-piston fixed front caliper paired with an 11.8-inch diameter solid rotor measuring 0.2 inches in thickness. The rear braking system uses a 2-piston floating caliper with an 11.5-inch diameter rotor measuring 0.23 inches in thickness. The front brake is a single-disc configuration.

Anti-Lock Braking System is standard. The motorcycle also includes a Cornering Enhanced Anti-Lock Braking System, which adjusts braking response based on lean angle data. Traction Control System and Cornering Enhanced Traction Control System are included to manage rear wheel slip under varying traction conditions.

The Drag-Torque Slip Control System and its cornering-enhanced version help regulate rear wheel behavior during aggressive downshifts. The Tire Pressure Monitoring System is integrated into the instrumentation, providing continuous monitoring of tire inflation levels.

Electronic Linked Braking, Vehicle Hold Control, Wheel Lift Mitigation, and Enhanced Lift Mitigation are not included in this model.

Electrical Architecture and Power Management

Electrical power is supplied by a sealed, maintenance-free absorbed glass mat battery rated at 12 volts and 17.5 amp-hours. The battery delivers 310 cold cranking amps at 0 degrees Fahrenheit.

Charging is handled by a three-phase 48-amp system producing 364 watts at 13 volts and 900 rpm, with a maximum output of 624 watts at 13 volts and 2,000 rpm. Starting is achieved through a 1.6 kW electric starter motor with solenoid shift engagement.

Lighting systems are fully LED. The headlamp includes low beam, high beam, and signature position lighting. Front and rear turn signals are LED bullet-style units. The tail and stop lamps are also LED bullet-style assemblies.

Instrumentation and Rider Interface

Instrumentation is centered around a 4-inch analog speedometer paired with a digital information display. The digital interface provides a gear position indicator, odometer, fuel level, ride modes, heated gear indicator, traction control status, ABS status, tire pressure monitoring, cruise control indicator, clock, trip meters, range calculation, and tachometer display.

The motorcycle includes a USB C-Type power outlet delivering 5 volts at 2.4 amps for device charging. GPS navigation, Bluetooth® connectivity, infotainment system, speakers, headset connectivity, and audio system components are not included in this configuration.

Fuel Capacity and Efficiency Data

Fuel capacity is 3.5 gallons. A fuel injection warning light activates when approximately 1 gallon remains in reserve. Estimated fuel economy under city and highway testing conditions is 47 miles per gallon, equivalent to 5 liters per 100 kilometers.

Oil capacity with filter is 5 quarts. Transmission capacity is 1 quart. Primary chain case capacity is 1.25 quarts. Coolant capacity is not applicable due to the air-cooled engine configuration.

Dimensions and Ergonomic Measurements

Seat height when laden measures 25.8 inches. Seat height when unladen measures 26.8 inches. Static ground clearance is 4.9 inches. These measurements support accessible mounting and stable footing at stops.

The motorcycle measures 91.3 inches in total length with a wheelbase of 64.2 inches. Overall width is 36.4 inches and overall height is 45.7 inches. These proportions contribute to predictable handling and consistent weight distribution.

Schedule a Test Ride at Harley-Davidson® of Glendale

We invite you to examine the 2026 Harley-Davidson® Street Bob® in detail at Harley-Davidson® of Glendale near Lancaster, CA. Experience the Milwaukee-Eight® 117 engine’s 120 ft-lb torque output and evaluate the six-speed transmission performance across varied speeds. Assess the functionality of Cornering Enhanced ABS, traction control systems, and the integrated tire pressure monitoring display. Observe the LED lighting system, braking components, and suspension travel under controlled riding conditions. Schedule a test ride to analyze the engineering, specifications, and control systems of this model in person.