2026 Harley-Davidson® Road Glide® near Lancaster, CA

2026 Harley-Davidson Road Glide touring motorcycle riding on an open desert highway near Lancaster, CA with mountain views in the background.

The 2026 Harley-Davidson® Road Glide® is engineered as a fixed-fairing touring motorcycle that integrates a Milwaukee-Eight® 117 engine, a rigid steel chassis, a 6-Speed Cruise Drive® transmission, and a comprehensive suite of electronic rider aids. Its dimensions, suspension geometry, braking components, infotainment platform, and electrical architecture reflect a design focused on measurable performance, structural strength, and integrated technology. This model combines a 117 cubic inch displacement engine with cornering-enhanced safety systems, a 12.3-inch TFT display, and a fully integrated lighting and charging system. The following sections detail the technical specifications and functional systems that define the 2026 Harley-Davidson® Road Glide®.

Milwaukee-Eight® 117 Engine Specifications and Output

The 2026 Harley-Davidson® Road Glide® is powered by the Milwaukee-Eight® 117 engine, displacing 117 cubic inches or 1,923 cubic centimeters. The engine uses a bore of 4.075 inches and a stroke of 4.5 inches, resulting in a long-stroke configuration that supports torque-focused performance. The compression ratio is 10.3 to 1.

This V-twin configuration uses pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder. The valve arrangement promotes consistent valve timing and reduces maintenance requirements. The fuel system consists of Electronic Sequential Port Fuel Injection, designed to deliver accurate fuel metering under varying load and speed conditions. The lubrication system is pressurized and dry-sump, improving oil circulation and thermal stability.

Certified output figures measure 105 horsepower at 4,600 rpm and 130 foot-pounds of torque at 3,250 rpm. Torque testing follows the J1349 standard. The engine uses a fiberglass washable air cleaner and a 2-1-2 dual exhaust configuration with tapered mufflers. Recommended fuel is 91 octane or higher. Estimated fuel economy is 44 miles per gallon under combined city and highway conditions. Fuel capacity is 6 gallons, with a 1-gallon fuel reserve warning light integrated into the system.

Transmission, Clutch, and Final Drive Architecture

Power from the Milwaukee-Eight® 117 engine transfers through a mechanically actuated 10-plate wet clutch with Assist and Slip functionality. The assist mechanism reduces clutch lever effort, while the slip feature helps manage rear wheel stability during aggressive downshifts. This configuration supports controlled deceleration and smoother gear transitions.

The transmission is a 6-Speed Cruise Drive® system. Overall gear ratios are 9.593 in first gear, 6.65 in second, 4.938 in third, 4 in fourth, 3.407 in fifth, and 2.875 in sixth. These ratios provide strong torque multiplication in lower gears and reduced engine speed during highway cruising in sixth gear.

The primary drive uses a chain with a 34 to 46 ratio. The final drive is belt-driven with a 32 to 68 ratio. This belt configuration supports durability and reduced maintenance compared to exposed chain systems. Transmission capacity is 1 quart, while the primary chain case capacity is 1.1 quarts. Engine oil capacity with filter is 5 quarts, and coolant capacity measures 0.82 quarts.

Structural Frame and Chassis Geometry

The 2026 Harley-Davidson® Road Glide® uses a mild steel tubular frame with a two-piece stamped and welded backbone. Cast and forged junctions reinforce critical connection points. Twin down tubes support engine mounting and structural rigidity. The rear frame section bolts on and incorporates forged fender supports. All major structural connections are MIG welded.

The swingarm is constructed from mild steel using a two-piece drawn and welded section with forged junctions. This design supports rear suspension performance and maintains alignment under load.

Chassis geometry includes a 26-degree rake and a 29.25-degree fork angle. Trail measures 6.8 inches. The wheelbase extends 64 inches, contributing to directional stability at highway speeds. Lean angle measures 32 degrees on both the right and left sides, tested under SAE J1168 standards.

Static ground clearance is 5.7 inches. The overall length of the motorcycle measures 94.9 inches, the overall width is 37.2 inches, and the overall height is 51.8 inches. Seat height measures 26.6 inches when laden and 28.3 inches when unladen. These dimensions contribute to a low center of gravity and accessible stand-over height.

Weight as shipped is 802 pounds. Weight in running order is 838 pounds. Gross Vehicle Weight Rating is 1,360 pounds. Gross Axle Weight Rating measures 500 pounds at the front and 927 pounds at the rear. Luggage capacity totals 2.42 cubic feet.

Suspension Components and Ride Control

Front suspension consists of a 49 mm Dual Bending Valve fork with 4.6 inches of travel. The Dual Bending Valve design separates damping circuits to improve compliance over uneven surfaces and maintain front-end stability during braking.

Rear suspension uses dual outboard emulsion shocks with 3 inches of travel and preload adjustability. Preload adjustment allows the rider to compensate for passenger weight or luggage load. This configuration maintains consistent ride height and chassis balance.

The combination of front and rear suspension travel supports touring comfort while preserving controlled handling under varying road conditions.

Wheels, Tires, and Rolling Hardware

The 2026 Harley-Davidson® Road Glide® uses cast aluminum wheels. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width.

The motorcycle is equipped with Dunlop® Harley-Davidson® Series bias blackwall tires. The front tire specification is 130 by 60B19 M/C 61H. The rear tire specification is 180 by 55B18 M/C 80H. These tire dimensions support stable steering response and consistent traction under load.

Brake System and Integrated Rider Safety Enhancements

Braking components include dual floating rotors at the front measuring 12.6 inches in diameter and 0.18 inches in thickness. Each front rotor is paired with a 32 mm 4-piston fixed caliper mounted axially. The rear brake uses a single fixed rotor measuring 11.8 inches in diameter and 0.28 inches in thickness with an axially mounted caliper.

Anti-lock Braking System is standard equipment. Electronic Linked Braking is included to distribute braking force between front and rear wheels during deceleration. The Traction Control System monitors wheel speed and adjusts torque delivery to maintain traction. Drag-torque Slip Control System manages engine braking forces during aggressive downshifts. Vehicle Hold Control assists in maintaining brake pressure during uphill starts. The Tire Pressure Monitoring System is also included.

Cornering-enhanced systems expand functionality by integrating lean-angle data. These include the Cornering Enhanced Anti-lock Braking System, Cornering Enhanced Electronic Linked Braking, Cornering Enhanced Traction Control System, and Cornering Drag-torque Slip Control System. These systems adjust intervention levels based on motorcycle lean to help maintain control during cornering maneuvers.

Electrical System, Charging Capacity, and Lighting

The electrical system includes a sealed, maintenance-free 12-volt battery rated at 28 amp-hours and 405 cold cranking amps. Charging is managed by a three-phase 58-amp system capable of producing up to 754 watts at 13 volts.

The starting system uses a 1.6 kW electric starter with solenoid shift starter motor engagement. All primary lighting components use LED technology, including the headlamp, tail and stop lamp, and front and rear turn signals. LED lighting provides improved visibility and reduced electrical load compared to conventional halogen systems.

A 15-watt USB-C electric power accessory port is located in the media storage box. This allows device charging during operation.

Skyline™ OS Infotainment and Display Technology

The infotainment system operates on Skyline™ OS and features a 12.3-inch full-color TFT display measuring 312 mm. Digital gauges are integrated within this display. Vehicle information such as air temperature, oil pressure, and Engine Idle Temperature Management System status appears within the interface.

Audio output provides 50 watts per channel through two 5.25-inch fairing-mounted speakers. AM and FM radio are standard. USB connectivity supports SD card, flash drive, and MP3 file playback. Bluetooth® connectivity allows phone, media player, and headset pairing.

Apple CarPlay® compatibility is available through wireless or wired connection. The embedded navigation system is included, and Wi-Fi hotspot capability supports connected features. A rider and passenger intercom system is supported through compatible headsets sold separately.

Visit Harley-Davidson® of Glendale for a Test Ride

We encourage riders seeking a detailed understanding of the 2026 Harley-Davidson® Road Glide® to arrange a test ride at Harley-Davidson® of Glendale near Lancaster, CA. A scheduled ride allows you to assess the 105 horsepower output, the 130 foot-pounds of torque delivery, and the calibration of the 6-Speed Cruise Drive® transmission under controlled conditions. You can also evaluate the cornering-enhanced safety systems, braking responsiveness, and suspension compliance firsthand. The 12.3-inch TFT display, Skyline™ OS interface, and integrated navigation system can be reviewed during operation to confirm functionality and clarity. Contact our team to schedule your ride and examine the full technical capability of this touring platform.