2026 Harley-Davidson® Low Rider® ST near Lancaster, CA

Front view of a white 2026 Harley-Davidson Low Rider ST riding on an open road near Lancaster, CA under cloudy skies.

The 2026 Harley-Davidson® Low Rider® ST is engineered as a performance-focused sport-touring cruiser that integrates a high-output Milwaukee-Eight® 117 engine, advanced cornering safety systems, rigid chassis construction, and long-distance functional capacity. The motorcycle combines aggressive lean angles, dual front braking components, inverted front suspension, and electronic rider aids within a defined FXLRST platform. Its measurable performance figures, structural specifications, and integrated rider interface position it as a technically advanced model designed for controlled power delivery and sustained highway operation. Every major component reflects a deliberate mechanical specification rather than cosmetic enhancement.

High-Output Milwaukee-Eight® 117 Engine Architecture

The 2026 Harley-Davidson® Low Rider® ST is equipped with the Milwaukee-Eight® 117 High Output engine. This V-Twin powerplant displaces 117 cubic inches, equivalent to 1,923 cubic centimeters. The engine features a bore of 4.075 inches and a stroke of 4.5 inches, producing a compression ratio of 10.3 to 1. These internal dimensions support strong cylinder filling and consistent combustion efficiency across the operating range.

The engine generates 114 horsepower at 5,000 rpm and 128 ft-lb of torque at 4,000 rpm under J1349 testing standards. Torque delivery peaks within the mid-range, enabling controlled acceleration and sustained roll-on capability without requiring excessive engine speed. The pushrod-operated overhead valve system incorporates hydraulic self-adjusting lifters and four valves per cylinder. This configuration maintains valve clearance automatically and supports long-term mechanical consistency.

Fuel delivery is managed by Electronic Sequential Port Fuel Injection. The system meters fuel precisely based on throttle input and engine demand. The Heavy Breather intake features a washable exposed synthetic media element that supports airflow efficiency while maintaining filtration integrity. Exhaust gases exit through a 2-into-1 system with a catalyst located in the header assembly. The lubrication system uses a pressurized dry-sump configuration with an integrated oil cooler to regulate engine temperature during sustained operation.

Six-Speed Cruise Drive® Transmission and Drivetrain Specifications

The drivetrain configuration pairs the Milwaukee-Eight® 117 engine with a 6-Speed Cruise Drive® transmission. The gear ratios are engineered for both acceleration and highway efficiency. First gear carries an overall ratio of 9.311, while sixth gear provides a ratio of 2.79. Intermediate ratios include 6.454 in second gear, 4.793 in third gear, 3.882 in fourth gear, and 3.307 in fifth gear. This stepped progression balances launch performance with reduced engine speed at cruising velocity.

Primary drive is chain-operated with a 34 over 46 ratio. Final drive utilizes a belt system with a 32 over 66 ratio. The belt configuration supports smooth power transfer and reduced maintenance compared to traditional chain-only systems. Clutch operation relies on a mechanical 10-plate wet assist and conventional assembly. This design lowers lever effort while maintaining strong engagement under load.

Structural Dimensions and Weight Distribution

The 2026 Harley-Davidson® Low Rider® ST measures 92.9 inches in overall length, 35 inches in width, and 50.8 inches in overall height. The wheelbase extends to 63.6 inches. Steering geometry includes a 28-degree rake and a 5.7-inch trail measurement. These figures contribute to directional stability at higher speeds while maintaining predictable steering response.

Seat height measures 27 inches in the laden condition and 28.1 inches unladen. Static ground clearance is rated at 5.7 inches. The motorcycle achieves a lean angle of 31.3 degrees on both the right and left sides under J1168 testing standards. These specifications support cornering capability while preserving component clearance.

Fuel capacity totals 5 gallons, with a 1-gallon reserve warning for fuel injection systems. Oil capacity with filter is 5 quarts, while transmission capacity measures 1 quart. Primary chain case capacity is 1.25 quarts. The motorcycle weighs 686 pounds as shipped and 712 pounds in running order. Gross Vehicle Weight Rating is 1,160 pounds, with a front Gross Axle Weight Rating of 450 pounds and a rear rating of 730 pounds. Integrated luggage capacity provides 2 cubic feet of storage volume, supporting extended travel requirements.

Chassis Engineering and Suspension Configuration

The frame consists of a mild steel tubular structure with a rectangular section backbone. It incorporates stamped, cast, and forged junctions that are MIG welded for structural consistency. Aluminum forged fender supports reduce weight while maintaining rigidity. The swingarm uses mild steel tubular sections with a stamped cross-member and forged axle junctions. A removable belt spacer simplifies service access.

Front suspension utilizes a 43 mm inverted single-cartridge fork with aluminum triple clamps and a single-rate spring. The inverted configuration increases torsional rigidity during braking and directional changes. Front suspension travel measures 5 inches.

Rear suspension consists of a hidden coil-over monoshock with a free piston and 56 mm stroke. Hydraulic preload adjustment allows load-based tuning. Rear suspension travel measures 4.4 inches. This configuration centralizes mass and supports balanced chassis dynamics during acceleration and cornering.

Wheels, Tires, and Braking Components

The motorcycle rides on Radiate cast aluminum wheels. The front wheel measures 19 inches in diameter and 2.5 inches in width. The rear wheel measures 16 inches in diameter and 5 inches in width. Michelin® Scorcher 31 tires are fitted front and rear. The front tire specification is 110 over 90B19 with a 62H rating. The rear tire specification is 180 over 70B16 with a 77H rating. This tire combination balances longitudinal grip and cornering stability.

Braking hardware includes dual front floating rotors measuring 11.8 inches in diameter and 0.2 inches in thickness. The front calipers are 4-piston fixed units. The rear brake uses a single floating rotor measuring 11.5 inches in diameter and 0.23 inches in thickness, paired with a 2-piston floating caliper. Split 7-spoke rotor construction assists with heat dissipation and braking consistency. Anti-Lock Braking System functionality is standard.

Electrical System and Instrumentation Interface

The electrical system features a sealed, maintenance-free absorbed glass mat battery rated at 12 volts and 17.5 amp-hours, delivering 310 cold cranking amps at 0 degrees Fahrenheit. Charging is managed by a three-phase 48 amp system that produces 364 watts at 13 volts and 900 rpm, with maximum output of 624 watts at 13 volts and 2,000 rpm. Starting is handled by a 1.6 kW electric starter with solenoid shift engagement.

Lighting components are fully LED. The headlamp includes low beam, high beam, and signature position lighting. The tail and stop lamp use an LED buffet design. Front and rear turn signals utilize LED bullet-style units. This configuration improves visibility while reducing electrical draw.

Instrumentation centers on a 4-inch analog speedometer integrated with a digital display. The digital interface provides gear position, odometer, fuel level, ride modes, heated gear status, traction control status, ABS indication, Tire Pressure Monitoring System readings, cruise control status, clock, trip meters, range calculation, and tachometer indication. A USB C-Type power outlet delivers 5 volts at 2.4 amps for device charging. No infotainment system, Bluetooth® audio integration, or onboard navigation system is included in this model.

Advanced Rider Safety Systems and Cornering Enhancements

The 2026 Harley-Davidson® Low Rider® ST integrates multiple electronic rider safety systems. Standard systems include the Anti-Lock Braking System, Traction Control System, Drag-Torque Slip Control System, and Tire Pressure Monitoring System. These systems monitor wheel speed, throttle input, and braking force to maintain traction and stability.

Cornering Rider Safety Enhancements expand system capability by incorporating lean-angle data. Included features are the Cornering Enhanced Anti-Lock Brake System, the Cornering Enhanced Traction Control System, and the Cornering Drag-Torque Slip Control System. These systems adjust braking pressure and torque intervention relative to lean angle. Electronic Linked Braking and Wheel Lift Mitigation are not included in this configuration. Vehicle Hold Control is also not present.

Fuel Efficiency and Operational Capacity

Fuel economy is estimated at 47 miles per gallon under city and highway testing conditions. Combined with the 5-gallon fuel tank, this rating supports extended riding intervals before refueling. The motorcycle is engineered to operate on recommended 91 octane or higher fuel. The cooling system does not utilize liquid coolant, as this engine relies on air and oil cooling through its dry-sump configuration.

Schedule a Test Ride Today

We invite you to examine the 2026 Harley-Davidson® Low Rider® ST at Harley-Davidson® of Glendale near Lancaster, CA. During your visit, you can assess the 114 horsepower output, 128 ft-lb torque delivery, and the responsiveness of the 6-Speed Cruise Drive® transmission under controlled riding conditions. You can also evaluate the inverted 43 mm front suspension, dual 4-piston front braking system, and integrated cornering safety technologies during a structured test ride. The 5-gallon fuel capacity, 47 mpg efficiency estimate, and 2 cubic feet of luggage volume allow you to review its long-distance functional capability directly. Contact our team to schedule a test ride and analyze its engineering specifications firsthand through practical evaluation.