2026 Harley-Davidson® Low Rider® S near Lancaster, CA

Blue 2026 Harley-Davidson Low Rider S cruiser motorcycle parked on a city street near Lancaster, CA showcasing muscular design and V-twin engine.

The 2026 Harley-Davidson® Low Rider® S is engineered as a performance-oriented cruiser that combines high-displacement V-twin power with carefully configured chassis geometry, suspension components, and electronic rider systems. The motorcycle uses a Softail®-based frame platform paired with the Milwaukee-Eight® 117 High Output engine to deliver measurable performance figures and stable road behavior. The design integrates a rigid tubular steel frame, modern safety electronics, and precision suspension elements intended to support both highway cruising and aggressive cornering.

The motorcycle measures 92.9 inches in overall length with an overall width of 35 inches and a total height of 47.4 inches. A laden seat height of 27 inches contributes to a low riding position that supports stability during slow-speed operation and at stops. The unladen seat height measures 28.1 inches. The wheelbase measures 63.6 inches, providing stable straight-line tracking while maintaining responsive steering characteristics. Steering geometry includes a rake angle of 28 degrees with 5.7 inches of trail, which helps maintain predictable front-end feedback during acceleration and cornering.

Ground clearance is rated at 5.7 inches, allowing the motorcycle to maintain appropriate clearance during lean angles while preserving the low-profile stance associated with the Harley-Davidson® Low Rider® S model family. The right and left lean angles are both measured at 31.3 degrees. These figures support controlled cornering capability while maintaining the geometry expected from a performance cruiser platform.

High-Output Milwaukee-Eight® 117 Engine Architecture

The 2026 Harley-Davidson® Low Rider® S uses the Milwaukee-Eight® 117 High Output V-twin engine, which has a displacement of 117 cubic inches or 1,923 cubic centimeters. The engine uses a bore of 4.075 inches and a stroke of 4.5 inches. This configuration produces strong midrange torque output while maintaining smooth mechanical operation throughout the rev range.

The engine produces 128 foot-pounds of torque at 4,000 rpm and delivers 114 horsepower at 5,000 rpm. These figures provide strong acceleration and sustained power during highway operation. The engine torque testing method follows the J1349 standard.

Valve operation uses a pushrod-actuated overhead valve configuration with four valves per cylinder and hydraulic self-adjusting lifters. This design reduces maintenance requirements and supports consistent valve operation across extended mileage intervals. A compression ratio of 10.3:1 contributes to efficient combustion and responsive throttle behavior.

Fuel delivery uses Electronic Sequential Port Fuel Injection, which manages air and fuel mixture for consistent power delivery and efficient engine response. The intake system includes a heavy breather intake that uses synthetic filter media with a washable exposed element. This intake configuration supports increased airflow and simplified maintenance access.

The exhaust system uses a 2-into-1 layout with a catalytic element located in the header. This configuration promotes improved exhaust flow while meeting emissions compliance requirements. The engine also uses a pressurized dry-sump lubrication system combined with an oil cooler to regulate operating temperatures and support lubrication stability under demanding riding conditions.

Six-Speed Cruise Drive® Transmission and Drivetrain

Power produced by the Milwaukee-Eight® engine is transferred through a mechanically robust drivetrain configuration designed for durability and smooth operation. The primary drive system uses a chain drive with a 34 to 46 ratio. Final power delivery to the rear wheel uses a belt drive with a 32 to 66 ratio.

The clutch system uses a mechanical ten-plate wet clutch that incorporates assist and conventional engagement characteristics. This design reduces lever effort while maintaining predictable engagement during acceleration and gear changes.

The motorcycle uses a six-speed Cruise Drive® transmission. This gearbox allows efficient engine operation across a wide range of speeds while supporting relaxed cruising at highway speeds. The overall gear ratios are engineered to maintain torque delivery throughout the powerband.

First gear uses a ratio of 9.311, providing strong initial acceleration. Second gear uses a ratio of 6.454, followed by third gear at 4.793. Fourth gear operates with a ratio of 3.882 while fifth gear uses a ratio of 3.307. Sixth gear operates at 2.79, allowing the engine to maintain efficient rpm levels during highway travel.

Structural Frame and Chassis Construction

The chassis of the 2026 Harley-Davidson® Low Rider® S uses a mild steel tubular frame with a rectangular section backbone. The frame integrates stamped, cast, and forged junctions that are MIG welded for structural strength. Aluminum forged fender supports contribute to reduced weight and improved durability.

The swingarm is constructed using mild steel tubular sections combined with a stamped cross-member and forged axle junctions. These components are also MIG welded to maintain structural rigidity. The design includes a removable belt spacer that simplifies servicing of the belt drive system.

This chassis structure supports a running order weight of 670 pounds, while the as-shipped weight is listed at 644 pounds. The gross vehicle weight rating is 1,160 pounds. The gross axle weight rating is 450 pounds for the front axle and 730 pounds for the rear axle.

Fuel capacity is measured at 5 gallons, with a reserve fuel capacity warning light that activates when approximately 1 gallon of fuel remains. Oil capacity with the filter installed measures 5 quarts. The primary chain case capacity measures 1.25 quarts, while transmission capacity is listed at 1 quart.

Suspension System and Ride Control

The suspension configuration of the 2026 Harley-Davidson® Low Rider® S is designed to balance handling precision with ride comfort. The front suspension uses a 43 millimeter inverted single-cartridge fork with aluminum fork triple clamps and a single-rate spring. This inverted design increases structural rigidity and helps maintain consistent steering response during braking and cornering.

Front suspension travel measures 5 inches. This travel allows the fork to absorb road surface irregularities while maintaining stable front-end geometry.

The rear suspension uses a hidden coil-over monoshock with a free piston design. The shock provides a stroke of 56 millimeters and includes hydraulic preload adjustment. This feature allows riders to adjust the rear suspension to accommodate changes in rider weight or additional cargo.

Rear suspension travel measures 4.4 inches. The combination of front and rear suspension travel helps maintain tire contact with the road surface while preserving the motorcycle’s low-profile stance.

Wheel Configuration and Tire Specification

The wheel configuration uses cast aluminum wheels finished in black with a radiate design. The front wheel measures 19 inches in diameter and has a width of 2.5 inches. The rear wheel measures 16 inches in diameter with a width of 5 inches.

The motorcycle uses Michelin® Scorcher 31 tires at both ends. These tires are designed to provide consistent grip and stability under varying riding conditions.

The front tire specification is 110/90B19 with a load rating of 62H. The rear tire specification is 180/70B16 with a load rating of 77H. This tire combination supports stable cornering behavior and effective traction during acceleration.

Dual-Disc Braking System and Control Hardware

The braking system on the 2026 Harley-Davidson® Low Rider® S uses a dual front brake configuration designed to improve stopping capability. The front brakes use four-piston fixed calipers combined with floating rotors that measure 11.8 inches in diameter. Rotor thickness measures 0.2 inches.

The rear braking system uses a two-piston floating caliper combined with a rotor measuring 11.5 inches in diameter and 0.23 inches in thickness. Both front and rear rotors use a black split seven-spoke floating design that supports heat dissipation and consistent braking performance.

Anti-lock Braking System functionality is included as a standard feature. The system monitors wheel speed and prevents wheel lock during heavy braking, helping maintain directional control and stability.

Electrical System and Instrumentation Technology

The electrical system uses a sealed maintenance-free absorbed glass mat battery rated at 12 volts with a capacity of 17.5 amp hours. Cold cranking performance is rated at 310 cold cranking amps at zero degrees Fahrenheit.

Charging is handled by a three-phase 48 amp charging system that produces 364 watts at 13 volts and 900 rpm. Maximum output is rated at 624 watts at 13 volts and 2,000 rpm.

The motorcycle uses a 1.6-kilowatt electric starter motor with solenoid shift engagement. This configuration supports reliable starting performance across different temperature conditions.

Lighting across the motorcycle uses LED technology. The headlamp assembly includes LED low beam and high beam lighting with a signature position lamp. The rear lighting system uses an LED tail and stop lamp. Front and rear turn signals use LED bullet-style indicators.

Instrumentation is provided through a four-inch analog speedometer combined with a digital display. The digital display provides a gear indicator, odometer information, fuel level status, ride modes, heated gear status, traction control indicator, anti-lock brake system indicator, tire pressure monitoring information, cruise control status, clock, trip data, range estimation, and tachometer indication.

A USB-C power outlet provides electrical power for compatible devices with an output of five volts at 2.4 amps.

Integrated Rider Safety Technologies

The 2026 Harley-Davidson® Low Rider® S includes several electronic rider safety technologies designed to support traction control and braking stability. The motorcycle includes a Traction Control System that regulates rear wheel torque when reduced traction is detected.

Drag-torque Slip Control System functionality helps reduce rear wheel instability during aggressive downshifting. The motorcycle also includes a Tire Pressure Monitoring System that provides real-time tire pressure information through the instrument display.

Cornering-sensitive safety systems are also included. Cornering Enhanced Anti-lock Brake System adjusts braking pressure based on lean angle to maintain traction during cornering. Cornering Enhanced Traction Control System regulates rear wheel torque when the motorcycle is leaned over. Cornering Drag-torque Slip Control System reduces rear wheel slip during engine braking while the motorcycle is leaned into a turn.

These integrated systems work together to improve stability and traction management across varying road conditions and riding situations.

Schedule a Test Ride Today

Riders interested in examining the mechanical configuration and performance characteristics of the 2026 Harley-Davidson® Low Rider® S can schedule a test ride through Harley-Davidson® of Glendale near Lancaster, CA. Our team can provide detailed information regarding the Milwaukee-Eight® 117 High Output engine, the inverted front suspension system, and the integrated traction and braking technologies. A test ride allows riders to evaluate the torque delivery, chassis stability, and braking performance under controlled riding conditions. During the visit, our staff can also review the motorcycle’s instrumentation features and safety systems. Contact our dealership to arrange a test ride and explore the engineering and performance characteristics of the 2026 Harley-Davidson® Low Rider® S firsthand.