2026 Harley-Davidson® CVO™ Street Glide® near Lancaster, CA

2026 Harley-Davidson CVO Street Glide in orange and black parked on a scenic mountain highway, available near Lancaster CA

The 2026 Harley-Davidson® CVO™ Street Glide® is engineered as a factory-custom touring motorcycle with a focus on high-displacement performance, structural stability, and integrated electronic systems. The model combines a Milwaukee-Eight® VVT 121 engine, a six-speed Cruise Drive® transmission, a steel-frame chassis, and a comprehensive infotainment and rider safety suite. Its configuration reflects a design approach that prioritizes torque output, controlled handling geometry, and system-level integration across drivetrain, suspension, braking, and digital interfaces. The platform also supports extended riding through its fuel capacity, luggage volume, and electrical infrastructure, all of which are configured to meet the functional demands of long-distance touring.

Milwaukee-Eight® VVT 121 Engine Configuration and Output

The motorcycle is equipped with a Milwaukee-Eight® VVT 121 engine, which has a displacement of 121 cubic inches or 1,977 cubic centimeters. The engine uses a pushrod-operated overhead valve system with hydraulic, self-adjusting lifters and four valves per cylinder. This configuration reduces the need for manual valve adjustment and supports consistent valve operation across extended mileage intervals. The bore measures 4.075 inches, and the stroke measures 4.625 inches, producing an 11.4:1 compression ratio. 

Fuel delivery is managed through Electronic Sequential Port Fuel Injection, which provides controlled fuel metering under varying load and speed conditions. Air intake is filtered through a synthetic felt, washable air cleaner, which supports maintenance efficiency. Exhaust flow is handled by a 2-1-2 dual exhaust system designed to manage emissions and maintain balanced exhaust output. Lubrication is provided by a pressurized dry-sump system, which separates oil storage from the crankcase to improve oil control during sustained operation.

The engine produces 139 foot-pounds of torque at 3,000 revolutions per minute and 115 horsepower at 4,500 revolutions per minute. This output profile emphasizes low and mid-range torque delivery, which is suitable for accelerating a fully equipped touring motorcycle and maintaining performance under load. The engine is designed to operate on 91-octane or higher fuel, aligning with its compression ratio and combustion requirements.

Six-Speed Cruise Drive® Transmission and Drivetrain Layout

Power from the engine is transferred through a chain-driven primary system with a 34/46 ratio. Final drive is handled by a belt system with a 32/68 ratio. This combination supports durability and reduced maintenance compared to fully chain-driven systems while maintaining efficient power transfer. The clutch is a mechanically actuated, 10-plate wet clutch with Assist and Slip functionality. The assist mechanism reduces lever effort during operation, while the slip feature helps control rear wheel behavior during aggressive downshifts.

The transmission is a six-speed Cruise Drive® unit, configured to provide a wide ratio spread across gears. The overall gear ratios are 9.593 in first gear, 6.65 in second gear, 4.938 in third gear, 4.0 in fourth gear, 3.407 in fifth gear, and 2.875 in sixth gear. Lower gears provide the mechanical advantage required for initial acceleration and load movement, while higher gears reduce engine speed during highway operation. 

Frame Construction and Steering Geometry

The chassis is constructed using a mild steel tubular frame with a two-piece stamped and welded backbone. The structure incorporates cast and forged junctions, twin downtubes, and a bolt-on rear frame with forged fender supports. The swingarm is also fabricated from mild steel, using a two-piece drawn and welded section with forged junctions. 

Steering geometry includes a rake angle of 26 degrees, a fork angle of 30 degrees, and a trail measurement of 6.7 inches. The wheelbase measures 64 inches. These values contribute to directional stability and predictable steering response, particularly at sustained speeds. The overall length of the motorcycle is 94.9 inches, with an overall width of 38.4 inches and an overall height of 53.1 inches.

Seat height is specified at 26.7 inches in the laden condition and 28.2 inches unladen. Static ground clearance is 5.5 inches. These dimensions indicate a low seating position relative to the overall size of the motorcycle, supporting rider accessibility and center-of-gravity management. Lean angles are rated at 32 degrees on both the left and right sides, indicating balanced cornering clearance within the constraints of a touring platform.

Suspension System and Load Adaptability

The front suspension consists of a 47 millimeter inverted fork assembly. This design improves front-end rigidity and steering precision compared to conventional fork configurations. Rear suspension is provided by dual adjustable emulsion shocks. The left shock includes remote preload adjustment, while the right shock uses threaded preload adjustment. These features allow the suspension to be tuned for variations in rider weight, passenger load, and luggage.

Suspension travel is 4.6 inches at the front and 3.0 inches at the rear. This travel range is configured to absorb road irregularities while maintaining chassis stability. The combination of inverted front forks and adjustable rear shocks supports controlled damping and consistent ride characteristics across different riding conditions.

Wheels, Tires, and Braking Components

The motorcycle is equipped with gloss black, 9-spoke cast aluminum wheels. The front wheel measures 19 inches in diameter and 3.5 inches in width, while the rear wheel measures 18 inches in diameter and 5 inches in width. Tires are Dunlop® Harley-Davidson® Series bias blackwall units. The front tire is sized at 130/60B19, and the rear tire is sized at 180/55B18. These dimensions provide a balance between stability, load capacity, and traction.

The braking system includes dual front floating rotors with a diameter of 12.6 inches and a thickness of 0.18 inches. These rotors are paired with 32 millimeter, four-piston fixed calipers mounted radially. The rear brake uses a fixed rotor with a diameter of 11.8 inches and a thickness of 0.28 inches, paired with a single axially mounted caliper. This configuration supports consistent braking performance and heat dissipation under repeated use.

Anti-lock Braking System functionality is included as standard equipment. The braking system is integrated with additional electronic controls that manage brake force distribution and traction under varying conditions.

Electrical System and Power Distribution

The electrical system is designed to support both vehicle operation and auxiliary electronic components. The battery is a sealed, maintenance-free 12-volt unit rated at 28 amp-hours with a cold cranking capacity of 405 amperes. Charging is handled by a three-phase system rated at 58 amps, with a maximum output of 754 watts at 13 volts. This capacity supports lighting, infotainment, navigation, and accessory power requirements.

Starting is provided by a 1.6-kilowatt electric starter with solenoid shift engagement. Lighting components include LED headlamps, tail and stop lamps, front signal lamps, and rear turn signals. These components are designed to provide consistent illumination and reduced power consumption compared to traditional lighting systems.

A 15-watt USB-C power outlet is integrated into the media storage compartment. This allows for direct charging of compatible electronic devices. Digital gauges are integrated into the primary display, consolidating vehicle information into a centralized interface.

Skyline™ OS Infotainment and Connectivity Systems

The infotainment system operates on the Skyline™ OS platform and is displayed through a 12.3-inch full-color TFT screen. The system delivers 125 watts per channel through a four-speaker configuration. The speaker layout includes two 6.5-inch units mounted in the fairing and two 5 by 7 inch units mounted in the saddlebags. 

Media functionality includes AM and FM radio, as well as USB-based playback of supported formats. Bluetooth® connectivity supports hands-free mobile phone operation, media playback, and headset integration. Apple CarPlay® compatibility is available in both wireless and wired formats. The system also supports rider and passenger intercom functionality, with voice-activated operation available for compatible headsets.

Navigation functionality is embedded within the system and integrates with connectivity features to provide route guidance and environmental data. The vehicle information display includes readings such as air temperature, oil pressure, and engine idle temperature management system status. 

Rider Safety Systems and Electronic Controls

The motorcycle includes a comprehensive set of rider safety enhancements designed to support braking, traction, and stability. Standard systems include Anti-lock Braking System, Electronic Linked Braking, Traction Control System, Drag-torque Slip Control System, Vehicle Hold Control, and Tire Pressure Monitoring System. These systems monitor wheel speed, brake input, throttle position, and other variables to adjust performance in response to changing conditions.

Cornering-enhanced versions of these systems are also included. These include Cornering Enhanced Anti-lock Braking System, Cornering Enhanced Electronic Linked Braking, Cornering Enhanced Traction Control System, and Cornering Drag-Torque Slip Control System. These features account for lean angle when applying control inputs, allowing the system to adjust braking and traction behavior during cornering.

Vehicle Hold Control assists in maintaining position when stopped on an incline by applying brake pressure until the rider accelerates. Tire Pressure Monitoring provides real-time data on tire inflation levels, supporting maintenance and safety awareness. 

Fuel Capacity, Weight Distribution, and Touring Range

The fuel tank has a capacity of 6.0 gallons, with a reserve fuel capacity of approximately 1.0 gallon indicated by a warning light. Fuel economy is rated at 45 miles per gallon under estimated city and highway conditions. This combination supports extended riding distances between refueling stops.

Oil capacity is 5 quarts with filter, while the transmission holds 1 quart and the primary chain case holds 1.1 quarts. Coolant capacity is 0.82 quarts. These values define the fluid requirements necessary for maintaining engine and drivetrain operation.

The motorcycle has an as-shipped weight of 800 pounds and a running order weight of 838 pounds. Gross vehicle weight rating is 1,360 pounds. The front axle is rated at 500 pounds, and the rear axle is rated at 927 pounds. Luggage capacity is measured at 2.2 cubic feet. 

Visit Harley-Davidson® of Glendale for a Test Ride

We encourage you to schedule a test ride to examine the technical systems of the 2026 Harley-Davidson® CVO™ Street Glide® in operation. A ride provides the opportunity to assess the torque delivery of the Milwaukee-Eight® VVT 121 engine and the function of the six-speed Cruise Drive® transmission under controlled conditions. You can evaluate the braking system, suspension response, and electronic safety features across different riding scenarios. The integrated infotainment system and connectivity features can also be reviewed directly from the rider interface. Visit Harley-Davidson® of Glendale near Lancaster, CA, to arrange a test ride and review the motorcycle’s specifications in detail with our team.