The 2026 Harley-Davidson® CVO™ Street Glide® Limited is engineered as a large-displacement touring motorcycle with a focus on measurable performance, integrated systems, and long-distance capability. It features a Milwaukee-Eight® VVT 121 engine with a displacement of 121 cubic inches or 1,977 cc, supported by a high compression ratio of 11.4:1. The motorcycle is configured with a six-speed transmission, belt-driven final drive, and a fully integrated electronic control system that manages fueling, traction, and braking. Its structural design combines a tubular steel frame with advanced suspension components, ensuring consistent handling across extended riding conditions.
Engine Configuration and Output Characteristics
The Milwaukee-Eight® VVT 121 engine utilizes a pushrod-operated overhead valve design with four valves per cylinder and hydraulic self-adjusting lifters. This configuration reduces maintenance requirements and maintains consistent valve operation over time. The bore measures 4.075 inches and the stroke measures 4.625 inches, resulting in a total displacement of 121 cubic inches. The engine produces 115 horsepower at 4,500 rpm and generates 139 ft-lb of torque at 3,000 rpm, providing strong output at lower engine speeds and sustained performance at cruising ranges.
Fuel delivery is managed by an electronic sequential port fuel injection system, which ensures precise fuel metering across varying throttle inputs and environmental conditions. The lubrication system is pressurized and dry-sump, supporting consistent oil circulation and temperature control during extended operation. Air intake is handled by a fiberglass, washable air cleaner, allowing for reusable filtration. The exhaust system uses a 2-1-2 dual configuration with tapered mufflers, designed to maintain balanced exhaust flow and support engine efficiency.
Transmission and Drivetrain Mechanics
The motorcycle is equipped with a six-speed Cruise Drive® transmission that distributes power across a wide range of gear ratios. The first gear ratio of 9.593 supports controlled acceleration from a stationary position. The second gear ratio of 6.65 and the third gear ratio of 4.938 allow for progressive acceleration. The fourth gear ratio of 4.0 and the fifth gear ratio of 3.407 provide mid-range efficiency, while the sixth gear ratio of 2.875 reduces engine speed during highway operation.
The drivetrain uses a chain-driven primary system with a 34 to 46 ratio, combined with a belt-driven final drive with a 32 to 68 ratio. This configuration minimizes maintenance requirements and reduces mechanical noise. The clutch is a mechanically actuated 10-plate wet system with assist and slip functionality, which reduces lever effort and improves stability during downshifting.
Structural Engineering and Frame Design
The frame is constructed from mild steel and uses a tubular architecture with a two-piece stamped and welded backbone. Cast and forged junctions reinforce high-stress areas, while twin down-tubes provide additional rigidity. The rear frame section is bolt-on with forged fender supports, allowing for structural integrity and serviceability.
The swingarm follows a similar construction method, using a two-piece drawn and welded design with forged junctions. This design supports load distribution and maintains alignment during acceleration and braking. The steering geometry includes a rake angle of 26 degrees and a fork angle of 29.25 degrees, paired with a trail measurement of 6.7 inches. The wheelbase measures 64 inches, contributing to directional stability and predictable handling characteristics.
Suspension System and Ride Control
The front suspension uses 47 mm inverted forks, which provide increased rigidity and improved steering precision. The inverted design reduces unsprung weight and enhances front-end feedback during cornering and braking. The rear suspension consists of dual adjustable emulsion shocks. The left shock includes remote preload adjustment, while the right shock uses threaded preload adjustment, allowing for fine-tuning based on rider weight and cargo load.
Suspension travel measures 4.6 inches at the front and 3 inches at the rear. This configuration supports consistent ride quality across varying road conditions while maintaining chassis stability. Optional suspension configurations may include adaptive ride height systems, which can adjust ground clearance dynamically.
Braking System and Control Integration
The braking system is designed for consistent stopping performance and controlled deceleration. The front braking system uses dual 4-piston fixed radial-mounted calipers paired with dual floating rotors measuring 12.6 inches in diameter. This setup provides strong braking force and improved heat dissipation.
The rear braking system uses a single axial-mounted caliper with a fixed rotor measuring 11.8 inches in diameter. Brake thickness measurements are 0.18 inches at the front and 0.28 inches at the rear. The motorcycle includes an anti-lock braking system that prevents wheel lock during sudden braking. Electronic linked braking distributes braking force between the front and rear wheels, improving stability and control.
Advanced Rider Safety Systems
The motorcycle integrates multiple electronic safety systems that operate continuously. The traction control system regulates wheel spin during acceleration. The drag-torque slip control system manages rear-wheel behavior during engine braking, reducing instability during downshifts. Vehicle hold control maintains brake pressure when stopped on an incline, preventing rollback.
The tire pressure monitoring system provides continuous feedback on tire conditions, supporting safe operation. Cornering-enhanced systems include cornering ABS, cornering electronic-linked braking, and cornering traction control. These systems adjust braking and traction parameters based on lean angle, maintaining control during cornering maneuvers. Cornering drag-torque slip control further stabilizes the motorcycle during deceleration in turns.
Dimensions, Weight, and Load Capacity
The overall length of the motorcycle is 103.3 inches, with a width of 40.7 inches and a height of 56.7 inches. The laden seat height is 26.4 inches, while the unladen seat height is 29.1 inches. Static ground clearance measures 5.5 inches, providing adequate clearance for standard road conditions.
The motorcycle has a running weight of 919 pounds and a shipped weight of 882 pounds. The gross vehicle weight rating is 1,360 pounds, with a front axle rating of 500 pounds and a rear axle rating of 927 pounds. The fuel tank has a capacity of 6 gallons, with a reserve capacity of 1 gallon. Oil capacity is 5 quarts, transmission capacity is 1 quart, and primary chain case capacity is 1.1 quarts. Coolant capacity is 0.82 quarts. Luggage capacity is measured at 4.8 cubic feet, supporting extended travel requirements.
Wheels, Tires, and Handling Dynamics
The motorcycle is equipped with dual-grain chrome 14-spoke wheels. The front wheel measures 19 inches in diameter and 3.5 inches in width, while the rear wheel measures 18 inches in diameter and 5 inches in width. Tire specifications include a 130/60B19 front tire and a 180/55B18 rear tire, both from the Dunlop® Harley-Davidson® series.
The tire construction is a bias blackwall, designed for durability and consistent traction. The motorcycle supports a lean angle of 31 degrees on both sides, allowing for controlled cornering. The combination of wheel dimensions, tire specifications, and chassis geometry contributes to stable handling and predictable steering response.
Electrical System and Lighting Components
The electrical system includes a sealed maintenance-free 12-volt battery with a 28 amp-hour capacity and 405 cold cranking amps. Charging is managed by a three-phase 58-amp system, capable of producing a maximum of 754 watts at 13 volts. The starting system uses a 1.6 kW electric starter with solenoid engagement.
Lighting components include LED headlamps, LED tail and stop lamps, and LED front and rear turn signals. These components improve visibility and reduce power consumption. The motorcycle includes digital gauges integrated within the display system, providing operational data in a centralized format.
A USB-C power outlet rated at 15 watts is located in the media storage compartment, allowing for device charging during operation. The electrical system supports additional accessories and integrated electronics without compromising performance.
Infotainment System and Connectivity Features
The infotainment system operates on Skyline™ OS and uses a 12.3-inch full-color TFT display. The system integrates vehicle information, navigation, and audio controls into a single interface. Audio output is delivered through six speakers, including fairing, Tour-Pak®, and lower fairing speaker locations. The system provides 125 watts per channel for four speakers and 150 watts per channel for two speakers.
Connectivity features include Bluetooth® integration for phone and media, as well as Apple CarPlay® compatibility through wireless or wired connections. The system supports USB-C connectivity and media playback from external devices. Navigation is embedded and provides traffic and weather updates through a Wi-Fi connection when available.
Additional features include rider and passenger intercom capability and text-to-speech functionality. The system also displays vehicle information such as air temperature and oil pressure. The infotainment platform is designed to provide clear access to operational data and communication tools during operation.
Visit Harley-Davidson® of Glendale for a Test Ride
We invite you to examine the technical systems and engineering of the 2026 Harley-Davidson® CVO™ Street Glide® Limited in person at Harley-Davidson® of Glendale near Lancaster, CA. A test ride allows you to assess the Milwaukee-Eight® VVT 121 engine output, the function of the six-speed transmission, and the responsiveness of the braking and safety systems. You can evaluate the suspension behavior, infotainment interface, and rider control features under typical riding conditions. Our team will provide detailed guidance on each system and its operation. Schedule a test ride to review how these specifications translate into measurable performance on the road.