2026 Harley-Davidson® CVO™ Road Glide® ST near Lancaster, CA

Rider on a red 2026 Harley-Davidson CVO Road Glide ST on a winding mountain highway near Lancaster, CA.

The 2026 Harley-Davidson® CVO™ Road Glide® ST is engineered as a performance-focused touring motorcycle with a clear emphasis on measurable specifications and integrated systems. Its configuration combines a large-displacement V-twin engine, a reinforced chassis, adjustable suspension components, and a fully integrated infotainment platform. The model is designed to support sustained highway operation while maintaining responsive handling and consistent braking performance. 

Engine Configuration and Output Characteristics

The motorcycle is equipped with a Milwaukee-Eight® 121 High Output engine featuring a displacement of 121 cubic inches or 1,977 cubic centimeters. The bore measures 4.075 inches, and the stroke measures 4.6 inches. This configuration supports a compression ratio of 11.4 to 1, which allows efficient combustion and contributes to consistent power delivery across the RPM range.

The engine produces 127 horsepower at 4,900 rpm and generates 145 pound-feet of torque at 4,000 rpm. These figures indicate a focus on mid-range torque output, which supports acceleration during highway merging and overtaking. The engine uses a pushrod-operated valve system with overhead valves and hydraulic, self-adjusting lifters. Each cylinder incorporates four valves, which enhances airflow and combustion efficiency while reducing the need for frequent valve adjustments.

Fuel delivery is managed through Electronic Sequential Port Fuel Injection, which meters fuel with precision to maintain consistent performance under varying load conditions. The air intake system includes a fiberglass, washable air cleaner, which supports airflow while allowing for maintenance without replacement. Exhaust gases are routed through a 2-1-2 dual exhaust system with tapered mufflers, contributing to optimized exhaust flow.

Lubrication is maintained through a pressurized dry-sump system, which ensures consistent oil distribution across engine components even during extended operation. 

Drivetrain Mechanics and Gear Ratio Distribution

The drivetrain uses a chain-driven primary system with a 34 to 46 ratio, transferring power from the engine to the transmission. The final drive uses a belt system with a 30 to 68 ratio, selected for its durability and reduced maintenance requirements compared to chain-driven final drives.

The transmission is a 6-speed Cruise Drive® unit, designed to balance acceleration and fuel efficiency. Gear ratios are structured to provide gradual transitions between speeds. First gear has a ratio of 10.233, followed by second at 7.093, third at 5.268, fourth at 4.266, fifth at 3.635, and sixth at 3.067. This progression supports controlled acceleration and reduced engine load during high-speed cruising.

The clutch is a mechanically actuated 10-plate wet system with Assist and Slip functionality. The assist mechanism reduces the effort required at the lever, while the slip feature helps control rear wheel behavior during downshifting. 

Frame Construction and Structural Geometry

The frame is constructed from mild steel using a tubular design with a two-piece stamped and welded backbone. It incorporates cast and forged junctions, twin down-tubes, and a bolt-on rear frame section with forged fender supports. The structure is assembled using MIG welding, which ensures consistent joint strength.

The swingarm is also made from mild steel and features a two-piece drawn and welded design with forged junctions. This contributes to structural rigidity and supports stable rear wheel alignment.

The motorcycle has a rake angle of 26 degrees and a fork angle of 29.25 degrees. The trail measures 6.7 inches, which contributes to directional stability at higher speeds. The wheelbase is 64 inches, supporting balanced weight distribution and predictable handling characteristics.

Suspension Systems and Travel Specifications

The front suspension uses 47-millimeter inverted forks with a 1x1 configuration. These forks allow adjustment for preload, compression damping, and rebound damping. This adjustability enables the rider to fine-tune suspension response based on load conditions and riding preferences.

Rear suspension is provided by emulsion shocks with adjustable preload, compression damping, and rebound damping. This system supports consistent ride quality and maintains contact between the rear tire and the road surface.

Front suspension travel is measured at 4.6 inches, while rear suspension travel is 3 inches. 

Wheels, Tires, and Brake System Engineering

The motorcycle uses black, 7-spoke cast aluminum wheels. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width. This configuration supports stability and traction across varying road surfaces.

The tires are Dunlop® Harley-Davidson® Series units. The front tire specification is 130 over 60 B19, while the rear tire specification is 180 over 55 B18. These tire dimensions contribute to a stable contact patch and predictable handling characteristics.

The braking system includes dual front disc brakes with 4-piston fixed radial-mounted calipers. The front rotors are wave-style, dual floating units with a diameter of 12.6 inches and a thickness of 0.18 inches. The rear brake uses a single axial-mounted caliper with a fixed rotor measuring 11.8 inches in diameter and 0.28 inches in thickness.

Anti-lock Braking System functionality is included as standard, ensuring controlled braking by preventing wheel lockup during deceleration.

Dimensions, Weight, and Capacity Metrics

The overall length of the motorcycle is 94.9 inches, with a width of 36.4 inches and a height of 50.4 inches. Seat height is 27.5 inches in the laden condition and 28.3 inches when unladen. These measurements contribute to a lower center of gravity and accessible seating position.

Ground clearance is 5.1 inches, which supports maneuverability without compromising stability. The motorcycle has a fuel capacity of 6 gallons, with a reserve capacity of 1 gallon. Oil capacity is 5 quarts, while transmission capacity is 1 quart. The primary chain case holds 1.1 quarts, and coolant capacity is 0.82 quarts.

Weight as shipped is 800 pounds, and weight in running order is 838 pounds. The gross vehicle weight rating is 1,360 pounds, with a front axle rating of 500 pounds and a rear axle rating of 927 pounds. Luggage capacity is measured at 2.42 cubic feet, supporting storage requirements for extended riding.

Electrical System and Lighting Components

The electrical system uses a sealed, maintenance-free 12-volt battery rated at 28 amp-hours and 405 cold cranking amps. Charging is managed through a three-phase system rated at 58 amps, delivering a maximum output of 754 watts at 13 volts.

Starting is handled by a 1.6 kilowatt electric starter with solenoid shift engagement. Lighting systems include LED headlamps, LED tail and stop lamps, and LED front and rear turn signals. These components support visibility and energy efficiency.

The motorcycle includes a USB-C power outlet rated at 15 watts, located in the media storage compartment. This allows for charging of compatible electronic devices during operation.

Infotainment System and Connectivity Features

The infotainment system operates on Skyline™ OS and is displayed through a 12.3-inch full-color TFT screen. This interface integrates vehicle data, navigation, and audio functions into a single display.

Audio output is rated at 125 watts per channel and is delivered through two 6.5-inch fairing-mounted speakers. The system supports AM and FM radio and allows media playback through USB connections.

Bluetooth® functionality enables hands-free mobile phone operation and media streaming. Apple CarPlay® compatibility is available through both wireless and wired connections. The system also supports navigation through Bluetooth® connectivity.

The embedded navigation system includes mapping functionality with traffic and weather data provided through a Wi-Fi hotspot connection. Vehicle information such as air temperature, oil pressure, and engine idle temperature management system status is displayed within the interface.

Rider Safety and Control Systems

The motorcycle incorporates multiple systems designed to enhance control and stability. Anti-lock Braking System functionality is combined with Electronic Linked Braking, which distributes braking force between front and rear wheels.

Traction Control System functionality regulates rear wheel slip during acceleration. Drag-Torque Slip Control System functionality manages engine braking forces during downshifting. Vehicle Hold Control assists in maintaining position during stops on inclines. The Tire Pressure Monitoring System provides continuous feedback on tire pressure levels.

Cornering-specific systems include enhanced versions of ABS, Electronic Linked Braking, Traction Control, and Drag-Torque Slip Control. These systems adjust braking and power delivery based on lean angle to maintain stability during cornering.

Fuel Efficiency and Operational Range

The motorcycle achieves an estimated fuel economy of 44 miles per gallon under combined city and highway conditions. This level of efficiency supports extended riding range when combined with the 6-gallon fuel tank capacity.

The fuel system is calibrated to maintain consistent delivery across varying throttle inputs and riding conditions. This contributes to predictable performance and efficient fuel usage over long distances.

Schedule a Test Ride at Harley-Davidson® of Glendale

We invite you to examine the 2026 Harley-Davidson® CVO™ Road Glide® ST in person at Harley-Davidson® of Glendale near Lancaster, CA. A scheduled test ride allows you to assess engine output, braking response, and suspension adjustability under controlled conditions. You can observe how the drivetrain manages gear transitions and how the safety systems support stability during operation. The integrated infotainment system and connectivity features can also be evaluated during the ride. Contact our team to arrange a test ride and review the motorcycle’s technical specifications in detail.