The 2026 Harley-Davidson® Breakout® is defined by a combination of large-displacement engine output, extended chassis geometry, and a targeted set of rider-assist systems. This model uses the Milwaukee-Eight® 117 Custom engine, paired with a 6-speed transmission and a belt-driven final drive. The structural design incorporates a long wheelbase, low seat height, and wide rear tire specification, all of which influence stability, rider reach, and traction characteristics. The motorcycle integrates electronic rider aids such as traction control, drag-torque slip control, tire pressure monitoring, and cornering-enhanced braking systems.
Engine Configuration and Output Characteristics
The Milwaukee-Eight® 117 Custom engine used in the 2026 Harley-Davidson® Breakout® features a displacement of 117 cubic inches, equivalent to 1,923 cubic centimeters. The bore measures 4.075 inches, and the stroke extends to 4.5 inches. This configuration supports a compression ratio of 10.3:1, which influences combustion efficiency and torque delivery. The engine uses pushrod-operated overhead valves with hydraulic self-adjusting lifters and four valves per cylinder. This design reduces the need for frequent valve maintenance while maintaining consistent operation across varying conditions.
Fuel delivery is managed through Electronic Sequential Port Fuel Injection, which regulates fuel distribution based on engine demand and operating conditions. The intake system includes a Helix-style air cleaner that supports airflow into the combustion chamber. Exhaust gases exit through a 2-into-2 staggered system with a catalyst integrated into the muffler. The lubrication system uses a pressurized dry-sump configuration with an oil cooler, which helps regulate engine temperature and maintain lubrication consistency under extended operation.
The engine produces 126 foot-pounds of torque at 3,000 revolutions per minute. Maximum power output is rated at 103 horsepower at 4,800 revolutions per minute. These values indicate a torque-focused performance curve, with significant output available at lower engine speeds. This characteristic supports acceleration from low speeds and reduces the need for frequent gear changes during steady operation.
Drivetrain Structure and Gear Ratio Distribution
The drivetrain configuration includes a primary chain drive with a 34/46 ratio. Power is transferred to the rear wheel through a belt final drive with a 32/66 ratio. This combination reduces mechanical noise and requires less maintenance compared to chain-based final drive systems. The clutch assembly consists of a mechanical 10-plate wet clutch with assist and conventional functionality, which helps manage lever effort and engagement consistency.
The transmission is a 6-Speed Cruise Drive® unit. Gear ratios are calibrated to distribute torque effectively across the speed range. First gear has an overall ratio of 9.311, which supports initial acceleration. Second gear is set at 6.454, followed by 4.793 in third gear. Fourth gear is 3.882, fifth gear is 3.307, and sixth gear is 2.79. The progression from lower to higher gears allows for a balance between acceleration and reduced engine speed during sustained operation.
Frame Architecture and Dimensional Layout
The frame is constructed from mild steel tubular sections with a rectangular-section backbone. The design includes stamped, cast, and forged junctions joined through MIG welding. Aluminum forged fender supports are integrated into the structure to provide strength while managing weight distribution. The swingarm uses mild steel tubular sections with a stamped cross-member and forged axle junctions. It also includes a removable belt spacer for drivetrain service access.
The motorcycle measures 93.5 inches in length, 37 inches in width, and 44.3 inches in height. The wheelbase is 66.7 inches, which contributes to longitudinal stability. The steering geometry includes a rake angle of 34 degrees and a fork angle of 36 degrees. The trail is measured at 5.7 inches. These values define the steering response and directional stability of the motorcycle.
Seat height is 25.6 inches when laden and 26.2 inches when unladen. The low seat height reduces the distance between the rider and the ground, which can improve stability during stops. Static ground clearance is 4.5 inches, which determines the minimum distance between the chassis and the road surface.
Suspension Design and Travel Specifications
The front suspension uses a 49 millimeter telescopic fork with dual-bending valve technology. The fork includes aluminum triple clamps and a dual-rate spring system. This configuration allows the suspension to respond differently based on compression speed, providing controlled damping during both small and large impacts. The rear suspension is a hidden coil-over monoshock with a free-piston design. It offers 43 millimeters of stroke and includes hydraulic preload adjustment, which allows the rider to modify suspension characteristics based on load conditions.
Front suspension travel measures 5 inches, while rear suspension travel is 3.4 inches. These values indicate the available vertical movement of the wheels relative to the chassis. The suspension system is designed to support the motorcycle’s weight and maintain tire contact with the road surface under varying conditions. The preload adjustment on the rear shock allows for compensation when carrying additional weight, which helps maintain consistent ride height and handling behavior.
Wheel Dimensions and Tire Specifications
The wheel configuration uses cast aluminum wheels with a 26-spoke design and a gloss black finish. The front wheel has a diameter of 21 inches and a width of 3.5 inches. The rear wheel measures 18 inches in diameter and 8 inches in width. This combination contributes to the motorcycle’s extended profile and influences steering characteristics.
The tires are Michelin® Scorcher 11 models. The front tire specification is 130/60B21, with a load and speed rating of 63H. The rear tire specification is 240/40R18, with a load and speed rating of 79V. The wide rear tire increases the contact patch with the road surface, which can enhance traction during acceleration. The narrower front tire supports directional control and steering input.
Braking System and Control Components
The braking system includes a 4-piston fixed front caliper and a 2-piston floating rear caliper. Both front and rear brakes use black split 7-spoke floating rotors. The front rotor has a diameter of 11.8 inches and a thickness of 0.2 inches. The rear rotor measures 11.5 inches in diameter with a thickness of 0.23 inches. The front braking system is not dual-disc, which reflects the model’s design configuration.
An anti-lock braking system is included as standard equipment. This system monitors wheel speed and adjusts braking force to prevent wheel lock during deceleration. The braking system is integrated with other rider-assist technologies to maintain stability during braking events.
Electrical System and Instrumentation Layout
The electrical system uses a sealed maintenance-free absorbed glass mat battery rated at 12 volts and 17.5 amp-hours, with 310 cold cranking amps at 0 degrees Fahrenheit. Charging is managed by a three-phase 48 amp system that produces 364 watts at 13 volts and 900 revolutions per minute, with a maximum output of 624 watts at 2,000 revolutions per minute. Starting is handled by a 1.6-kilowatt electric starter with solenoid shift engagement.
Lighting components include a full LED configuration. The headlamp provides low beam, high beam, and a signature position lamp. Front and rear turn signals are LED bullet-style units, and the tail and stop lights are integrated into a bullet-style LED assembly. This setup improves visibility and reduces power consumption compared to traditional lighting systems.
The instrument cluster consists of a 4-inch analog speedometer combined with a digital display. The display provides information such as gear position, odometer readings, fuel level, ride modes, traction control status, ABS status, tire pressure monitoring, cruise control, clock, trip data, range estimation, and tachometer readings. The system consolidates operational data into a single interface for ease of reference.
Rider Safety Systems and Electronic Controls
The 2026 Harley-Davidson® Breakout® includes a set of rider safety enhancements focused on traction, braking, and stability. An anti-lock braking system is included to prevent wheel lock during braking. The Traction Control System monitors rear wheel speed and adjusts engine output to reduce wheel spin. The Drag-torque Slip Control System manages rear wheel behavior during engine braking, reducing the likelihood of rear wheel instability.
The Tire Pressure Monitoring System provides information on tire pressure levels, allowing the rider to maintain optimal tire condition. These systems operate together to support controlled operation under varying conditions.
Cornering-enhanced systems are also included. Cornering Enhanced Anti-lock Braking System adjusts braking force based on lean angle. Cornering Enhanced Traction Control System modifies the traction control response when the motorcycle is leaned into a turn. Cornering Drag-torque Slip Control System manages engine braking effects during cornering. These systems expand the functionality of the standard safety features by incorporating lean-angle data into their operation.
Fuel Capacity and Operational Metrics
The fuel tank has a capacity of 5 gallons, with a reserve level indicated at approximately 1 gallon. Fuel economy is estimated at 49 miles per gallon under combined city and highway conditions. Oil capacity with the filter is 5 quarts, while the transmission holds 1 quart of fluid. The primary chain case capacity is 1.43 quarts.
The motorcycle has a weight of 655 pounds as shipped and 681 pounds in running order. The gross vehicle weight rating is 1,175 pounds. The front axle weight rating is 450 pounds, and the rear axle weight rating is 760 pounds. These values define the load limits and structural capacity of the motorcycle.
Schedule a Test Ride at Harley-Davidson® of Glendale
We encourage you to examine the 2026 Harley-Davidson® Breakout® in person to assess its mechanical configuration and performance characteristics. A scheduled test ride allows direct evaluation of the Milwaukee-Eight® 117 Custom engine, including its torque delivery and power output across the rpm range. It also provides an opportunity to observe the function of the 6-speed transmission, braking system, and traction control features during operation. You can review the instrument display, suspension response, and rider positioning under controlled conditions. Contact Harley-Davidson® of Glendale near Lancaster, CA to arrange a test ride and review the specifications in a practical setting.